Comment Faire Des Noeuds De Peche

Succeeding in his fishing knot is part of the béaba to know how to master à la a fisherman. Right here is a selection de fishing knots that room easy venir make, whether nous a lure, a swivel jaune between the leader et the henchmen line.

The lighter knot: the easy fishing knot for connecting a fluorocarbon venir a lure

The lighter knot is a fishing knot the was shown venir us passant par our friend et fishing guider Julien Audonnet during our stay in Guadeloupe. Venir our an excellent astonishment, ce turned the end that this fishing knot was as reliable oui it to be easy to make throughout our fishing trip. This “lighter” fishing knot permits you à connect a fluorocarbon v a gros diameter (greater than 50/100) to your lure.

This fishing node is therefore perfect parce que le heavy fishing such as pike or even exo. The seulement un requirements amie should have with elle is fluorocarbon 100% oui well oui a lighter.

Vous lisez ce: Comment faire des noeuds de peche

Realization de the lighter node in pictures

Take a lighter et heat the end ns the fluorocarbon venir melt it et form a petit mushroom.

2. Tie a simple knot two jaune three centimeters from thé mushroom, without tightening thé latter.

3. Passage the mushroom through thé lure attachment, climate pass it through the previously formed single knot.

4. Tighten the simple knot which blocks the mushroom and locks the loop.

Making the lighter knot in video

The Albright knot: thé connecting knot in between braid and nylon

Thealbright knotis certainly the most offered fishing knot passant par lure fishermen, whether in france or abroad. This fishing node is used to connect a braid venir a fluorocarbon jaune nylon leader. Easy to make, this fishing knot goes fairly well in the rings nous small and medium diameters de fluorocarbon. This fishing node comes for us in addition to the FG node if à la any diameter de fluorocarbon jaune nylon not better than 50/100.

Realization of the Albright knot in pictures

Make a large loop with thé leader and pass thé braid through it parce que le 10 à 15cm.

2. Wrap auto braid around auto loop for about ten transforms while coming back to thé loop.

3. Passage the excess object through the loop

4. Tighten auto knot by simultaneously pulling auto strand ns free braid and the leader. Couper the excess braid et leader

Realization ns the Albright knot in video

The FG knot: thé fishing knot pour connecting braid et fluorocarbon

The FG knot is a fishing knot pour fluidly connecting the braid to. A gros diameter fluorocarbon. With the FG knot or "Fine grip knot", the diameter du the knot is dramatically reduced compared to another fishing knot. This allows for better fluidity when thé knot passe through thé rings. Nous can therefore afford venir extend auto length ns the leader and ensure better discretion.

However, ce is rather long et complex venir master at auto start. Also, nous advise you à make this fishing knot tons in tranquility at loger on all your rods in order à avoid thé galleys oz in fishing action.

Realization of the FG knot in pictures

Wrap auto braid around auto index finger then the little finger by making a bridge. Make enough turns nous each finger soja that the braid does not slip.

2. Passage the fluorocarbon through the bridge formed between thé fingers. Do a U-turn with auto wrist and pass thé fluorocarbon again through the bridge created between thé fingers.

Voir plus: Prix De L'Or : Cours De L Or En Direct Belgique, Cours De L'Or Par Once En Direct Eur (€)

3. Repeat the operation 10 venir 20 times, alternating back et forth until thé braid no longer slips nous the fluorocarbon. Be sure à keep certain tension during this operation.

4. With auto remaining braid, make number of loops around the fluorocarbon to tighten the peach knot.

6. Couper the fluorocarbon le 3 mm from the braid

7. Make about 5 venir A nouveau loops around the braid

8. Take a lighter and burn the excess fluorocarbon.

Realization ns the FG knot in video

The Palomar knot: thé fishing knot to connect a line à a swivel

The Palomaris one ns the most famed fishing knots parce que le lure fishermen. Auto “Palomar” fishing knot allows you to connect a line to a swivel, a hook or even a staple.

This fishing node has developed its fame nous its strength cible above all on that is speed du execution. Ce is a very versatile knot, i beg your pardon can also be used conditions météorologiques nylon, fluorocarbon or braid. Nous the est différent hand, it is a complicated fishing knot à use on taille diameters of wire or small eyelets.

Realization ns the Palomar node in pictures

Make a loop at your line et pass it through thé swivel, hook or staple à be connected

2. Make une or deux loops, taking care venir include her swivel, hook or staple.

3. Pass your swivel, hook jaune staple through the loop

4. Tighten thé palomar knot et cut la fin the overabundance thread

Video realization ns the Palomar knot

The Rapala knot: thé fishing knot parce que le connecting a line venir a lure

TheRapala knotis a fishing knot likewise essential as soon as fishing through a lure. This easy-to-reproduce fishing knot enables a lure à be lien to a line, when retaining auto mobility benefits provided by a hook. It is also an ext discreet than a staple. Ce is an ideal fishing knot à la lures with solid wobbling or rolling favor crankbaits, jerkbaits jaune even swimbaits.

In ours opinion, thé Rapala knot comes in enhancement to auto lighter knot once we marche over smaller fluorocarbon diameters. The seul downside that have the right to be viewed in this fishing knot is that it forces you venir re-tie the knot every temps you desire to échanger lures.

Voir plus: Comment Redonner Confiance A Son Homme ? Un Homme Compris Est Un Homme Conquis

Realization ns the Rapala knot in picture

Make a loop through your line between 5 venir 10 cm from thé end de the latter et pass thé end through the eyelet du your lure

2. This time, passage the end ns your object through the loop initially formed.

3. Wind the wire 4 à 5 times around the henchmen line

4. Acier the end ns the cable through thé loop

5. Passage the end du the thread, this temps through thé loop created in thé upper part of the knot.

6. Moisten thé assembly, tighten auto knot et cut thé excess thread.

Making the Rapala knot in video

Want à learn more about putting a fishing knot into practice?

Our fishing guidesare likewise there à advise amie in auto selection de your node and your devices in general. In their company, amie can exercise several entice fishing techniques and try your hand at making thé fishing knots mentioned. Haricot de soja don't hesitate toget in touch with them.There is nothing meilleur than practice venir help tu in her choice.

Useful links to start lure fishing:

Braid or nylon: which line à choose pour lure fishing?